Search results for "-ray spectroscopy"
showing 10 items of 129 documents
A review on LiNixCo1−2xMnxO2 (0.1 ≤ x ≤ 0.33) cathode materials for rechargeable Li-ion batteries
2021
Abstract Electrochemical and physical properties of LiNixCo1−2xMnxO2 (0.1 ≤ x ≤ 0.33) electrode materials prepared by self-combustion were investigated. Pure LiNixCo1−2xMnxO2 (x = 0.1, 0.2, 0.33) materials with single phase and R-3 m layered structure were obtained as confirmed by X-ray diffraction. Energy Dispersive Spectroscopy, Scanning Electron Microscopy are commonly used to determine the chemical composition and the distribution of particle size of the three samples. The electrochemical performances of the samples were measured at different current rates in the 3–4.5 V potential range. The studied materials exhibit good discharge capacity. The magnetic susceptibility measurements and …
Direct laser welding of pure titanium to austenitic stainless steel
2018
Abstract Direct butt joining of pure titanium to 316L stainless steel with continuous Yb:YAG laser was performed with variation of the beam offset from joint line. Mechanical properties of samples were evaluated by tensile tests and three-point flexural tests. The fractured surfaces and cross sections of welds were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). Tensile properties of welds were strongly determined by the beam offset from joint line and are well described by Weibull statistics. Ultimate tensile strength of 174 ± 69 MPa and ultimate flexural strength of 297 ± 48 MPa were obtained. Brittle fracture took place in…
Response of AGATA segmented HPGe detectors to gamma rays up to 15.1MeV
2013
WOS: 000314826000009
Analysis of the morphology and composition of tooth apices apicectomized using three different ablation techniques.
2011
Objectives: To investigate apicectomies performed using burs, a CO2 laser or an Er:YAG laser and to evaluate the following aspects: morphology of apicectomized surfaces, presence of failures at the dentin/obturation material interface (marginal fit) of the apical portions of the root canals, and the proportions of chemical elements in the apicectomized surfaces. Study design: Twenty-four teeth were divided into three groups of eight and each group underwent apicectomy by one of three different ablation techniques: bur, CO2 laser or Er:YAG laser. The morphology of the apicectomized surfaces was then analyzed using scanning electron microscopy and their chemical composition was analyzed by en…
CORRELATION BETWEEN SPECTRAL, SEM/EDX AND ELECTROCHEMICAL PROPERTIES OF MAYA BLUE: A CHEMOMETRIC STUDY*
2009
Visible spectra, composition from SEM/EDX and solid-state electrochemical data are correlated for a set of 12 Maya Blue samples from different archaeological sites of Campeche and Yucatan (Mexico). In addition to indigo and dehydroindigo, indirubin and other possibly indigo-type compounds can be detected in Maya Blue samples. Application of hierarchical cluster analysis techniques allows similarity relationships to be established between samples from different sites, confirming prior results which suggest that the preparation of Maya Blue pigment evolved with time during the Maya culture following a ramified scheme.
Characterization of Iranian Moarraque glazes by light microscopy, SEM-EDX and voltammetry of microparticles
2008
Abstract Glazed ceramics have been traditionally used in Iran for decorating mosques and some civil historical buildings. In particular, Moarraque glazes have been extensively used in the indoor and outdoor decoration of mosques in Iran since the middle 14th century. The pieces have a complex elaboration based on a main glazed piece corresponding to the skeleton structure of the Shah Abbasi flower, which contains a number of holes, where are placed, mosaic-like, smaller glazed pieces forming a compact and single tile. The present work describes the analytical study performed on the glazes of several pieces of Moarraque tiles from the Ali Ebn Abi Taleb Mosque (Esfahan, Iran), which date back…
Possible functions of biomineralization of some Textulariid (Foraminifera) species of the Nw Iberian Margin
2016
The main goal of this work is to analyze the elemental composition of the test’s wall of some species/specimens of Textulariids (sub-class Subclass Textulariia), collected in surface sediments of the NW Iberian Margin. The elemental analyses was based on the Energy Dispersive Spectroscopy (EDS) on the Scanning Electron Microscope (SEM; Hitachi, S4100) of Textularia deltoidea, Textularia agglutinans, Sahulia conica, Karrerotextularia flintii, Siphotextularia heterostoma, Karreriella bradyi, Spiroplectammina sagittula and Arenoparrella mexicana . The elelemetal cocnentrations of the species wall were compared with the mineralogical composition (X-Ray diffraction) of the sediments of the stati…
Deformation and mixing of coexisting shapes in neutron-deficient polonium isotopes
2015
Coulomb-excitation experiments are performed with postaccelerated beams of neutron-deficient Po196,198,200,202 isotopes at the REX-ISOLDE facility. A set of matrix elements, coupling the low-lying states in these isotopes, is extracted. In the two heaviest isotopes, Po200,202, the transitional and diagonal matrix elements of the 2+1 state are determined. In Po196,198 multistep Coulomb excitation is observed, populating the 4+1,0+2, and 2+2 states. The experimental results are compared to the results from the measurement of mean-square charge radii in polonium isotopes, confirming the onset of deformation from Po196 onwards. Three model descriptions are used to compare to the data. Calculati…
Advances in High-Energy-Resolution CdZnTe Linear Array Pixel Detectors with Fast and Low Noise Readout Electronics
2023
Radiation detectors based on Cadmium Zinc Telluride (CZT) compounds are becoming popular solutions thanks to their high detection efficiency, room temperature operation, and to their reliability in compact detection systems for medical, astrophysical, or industrial applications. However, despite a huge effort to improve the technological process, CZT detectors’ full potential has not been completely exploited when both high spatial and energy resolution are required by the application, especially at low energies (<10 keV), limiting their application in energy-resolved photon counting (ERPC) systems. This gap can also be attributed to the lack of dedicated front-end electronics whic…
Galvanic deposition and characterization of brushite/hydroxyapatite coatings on 316L stainless steel
2016
In this work, brushite and brushite/hydroxyapatite (BS, CaHPO4·H2O; HA, Ca10(PO4)6(OH)2) coatings were deposited on 316L stainless steel (316LSS) from a solution containing Ca(NO3)2·4H2O and NH4H2PO4 by a displacement reaction based on a galvanic contact, where zinc acts as sacrificial anode. Driving force for the cementation reaction arises from the difference in the electrochemical standard potentials of two different metallic materials (316LSS and Zn) immersed in an electrolyte, so forming a galvanic contact leading to the deposition of BS/HA on nobler metal. We found that temperature and deposition time affect coating features (morphology, structure, and composition). Deposits were char…